QOS/4/QOSACTION

Message

QOS/4/QOSACTION: The LPU does not support this action. (ChassisId=[ChassisId],SlotId=[SlotId], Direction=[Direction], Action=[Action])

Description

The interface board in this slot did not support the QoS action.

Parameters

Parameter Name	Parameter Meaning
ChassisId	Chassis ID
SlotId	Slot number of the interface board
Direction	Indicates the direction of traffic
Action	Configured action, which can be: CAR CoS and color of the packet are remarked after CAR IPv4 single-hop weak policy IPv4 multi-hop weak policy IPv4 single-hop strong policy IPv4 multi-hop strong policy IPv6 single-hop weak policy IPv6 multi-hop weak policy IPv6 single-hop strong policy IPv6 multi-hop strong policy load-balance flow load-balance packet Loose URPF Strict URPF Sampling remark 8021p remark dscp remark IPv6 dscp remark ip-precedence remark mpls-exp ip netstream sampler except deny-action

Possible Causes

A QoS action that is not supported by the interface board was configured in the traffic behavior view.

Procedure

1. Execute the command display traffic policy to check whether the configuration contains actions which is not supported by LPU.

If yes, go to step 2.
If no, go to step 3.

2. Execute the command traffic behavior to go to the traffic behavior view. And then execute the command undo, to delete the traffic behaviors which are not supported by LPU. After ten minutes late, check whether the log still exists.

If yes, go to step 3.
If no, go to step 4.

3. Collect log and configuration information, and contact technical support personnel.

4. End.