QOS/4/QOS_SYSLOG_WITH_CHASSISID

Message

QOS/4/QOS_SYSLOG_WITH_CHASSISID: Anomaly message type is [PacketType],happened on port [Ifindex],traffic is [LogState],content is policy [PolicyId],classfier [ClassifierId],acl [ACLGroupId],direction [Direction],chassisid [ChassisId],slot [SlotId],message type is [PacketType_String],ip address is [Ip-value]/[ip-mask].

Description

The traffic rate exceeded the configured threshold.

Parameters

Parameter Name	Parameter Meaning
PacketType	Type of involved packets. TCP UDP IP
Ifindex	Interface index.
LogState	1: Threshold-crossing 2: Non-threshold-crossing
PolicyId	Traffic policy ID.
ClassifierId	MF classifier ID.
ACLGroupId	ACL number
Direction	Direction to which a traffic policy is applied. 0: upstream 1: downstream
ChassisId	Chassis ID
SlotId	Slot ID of a board
PacketType_String	The packet type, in the string format. The value is decide by packet type. tcp syn udp ip protocol-check
Ip-value	IP Address
ip-mask	Specifies the mask length of an IP address. The value ranges from 0 to 32.

Possible Causes

The traffic rate exceeded the configured threshold.

Procedure

1. Configure the device to report logs to the SYSLOG server for analysis. Check whether the problem is resolved.

If the problem is resolved, go to Step 3.
If the problem persists, go to Step 2.

2. Collect log and configuration information, and contact technical support personnel.

3. End.