CONFIGURATION/2/RESTORE_CONFIGURATION_FAIL_active

Message

CONFIGURATION/2/RESTORE_CONFIGURATION_FAIL_active: Failed to restore system configurations. (Result=[Result])

In VS mode, this log is supported only by the admin VS.

System configurations failed to be restored.

Parameter Name	Parameter Meaning
Result	Configuration restoration result.

Cause 0: The configuration database file was lost or damaged.
1. Run the display configuration recover-result command to check the commands that fail to be restored. Check whether the command format in the configuration file is correct or whether the command is executed in an incorrect view.
- If yes, go to Step 2.
- If the configuration is correct, go to Step 4.
2. Reconfigure the commands that fail to be restored.
- If the alarm persists, go to Step 3.
- If the alarm is cleared, go to Step 4.
3. Collect log and configuration information, and contact technical support personnel.

4. End.
Cause 1: The configuration file was lost or damaged.
Run the display unresumed-configuration active command to check the commands whose configurations fail to be restored.