OSPF/3/SHAMLINK_NBR_DOWN

Message

OSPF/3/SHAMLINK_NBR_DOWN: Shamlink neighbor event: neighbor state changed to Down. (ProcessId=[ProcessId], NeighborAddress=[NeighborAddress], NeighborEvent=[NeighborEvent], NeighborPreviousState=[NeighborPreviousState], NeighborCurrentState=[NeighborCurrentState], CpuUsage=[CpuUsage]%)

Description

An event indicating that the state of the neighbor over a sham link went Down was received.

Parameters

Parameter Name	Parameter Meaning
ProcessId	ID of an OSPF process
NeighborAddress	IP address of the neighbor over a sham link
NeighborEvent	Neighbor state change event
NeighborPreviousState	Previous state of the neighbor
NeighborCurrentState	Current state of the neighbor
CpuUsage	CPU usage

Possible Causes

An OSPF packet was received, or an operation that affected the OSPF neighbor relationship was performed.

Procedure

1. Run the display ospf sham-link command to check the configurations of the interface over the sham link.

If they are configured correctly, go to Step 3.
If they are configured incorrectly, go to Step 2.

2. Collect log and configuration information, and contact Huawei technical support personnel.

3. End.