SNMP/4/SNMP_BLACKLIST: User [UserOrIP] = [IPAddr_UserName] blocked.
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
UserOrIP |
User: User name that is added into the blacklist |
|
IPAddr_UserName |
IP Address |
Cause 1: The SNMP version was incorrect.
Cause 2: The SNMP packet was too long.
Cause 3: The PDU decoding was incorrect.
Cause 4: ACL rules denied the connection request.
Cause 5: The buffer was insufficient for processing the connection request sent from the NMS.
Cause 6: The group or user name was incorrect.
Cause 7: Authentication or authorization parameters were incorrect.
Cause 8: The trap failed to be sent because VBs were lost or the VB packet size was too small.
Cause 9: No response packets for Inform packets were received.
Cause 10: The proxy failed to perform the Set, Get, GetNext, or GetBulk action.
Check the SNMP version used on the device.
Increase the maximum packet length that the SNMP proxy can process.
This log is informational only, and no action is required.
Check whether ACL rules are applied for group or user names.
Increase the buffer space.
Check whether the configured group and user names are correct. If they are incorrect, correct them.
Check whether the user name and password are correct and whether the user name and password are correctly entered.
Add VBs or increase the VB packet length.
This log is informational only, and no action is required.
This log is informational only, and no action is required.