TCP/4/SOCKET_TCP_SEND_KC_AUTHEN_FAIL

Message

TCP/4/SOCKET_TCP_SEND_KC_AUTHEN_FAIL: Send TCP KeyChain authentication failed. (tcpConnLocalAddress=[tcpConnLocalAddress], tcpConnLocalPort=[tcpConnLocalPort], tcpConnRemAddress=[tcpConnRemAddress], tcpConnRemPort=[tcpConnRemPort], hwTCPProtocol=[hwTCPProtocol], hwTCPVrfName=[hwTCPVrfName])

Description

Keychain authentication failed on the packets sent for TCP connection setup.

Parameters

Parameter Name	Parameter Meaning
tcpConnLocalAddress	IP address of the local end of a TCP connection
tcpConnLocalPort	Port number of the local end of the TCP connection
tcpConnRemAddress	Destination IP address of the TCP connection
tcpConnRemPort	Port number of the peer end of the TCP connection
hwTCPProtocol	Name of an upper layer application protocol
hwTCPVrfName	Name of virtual routing and forwarding (VRF)

Possible Causes

Keychain authentication failed on the packets sent for TCP connection setup.

Procedure

1. Run the display current-configuration command on both ends of the TCP connection to check whether keychain authentication is configured.

If keychain authentication is configured on one end, configure keychain authentication on the other end. Then, check whether the log is cleared.
Yes: Go to Step 3.
No: Go to Step 2.
If keychain authentication has been configured on both ends, go to Step 2.

2. Collect trap, log, and configuration information, and contact technical support personnel.

3. End.