SSH/5/SSHC_LOGIN_FAIL: SSH client login failed. (ServiceType=[ServiceType], FailedReason=[FailedReason], UserName=[UserName], IPAddress=[IPAddress], VPNInstanceName=[VPNInstanceName])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
ServiceType |
Service type |
|
FailedReason |
Cause of the login failure |
|
UserName |
User Name |
|
IPAddress |
Client IP address |
|
VPNInstanceName |
VPN instance name |
Cause 1: The user name or password was incorrect.
Cause 2: The SSH service was invalid.
Cause 3: No public keys (ECC, DSA, and RSA) for authentication were saved on the server.
Cause 4: A deny rule for the current IP address was configured in the ACL.
Cause 5: The number of user connections on the SSH server reached the maximum.
Cause 6: SSH users were not enabled to access the default directory on the SSH server.
Cause 1: Contact the administrator to obtain the correct user name and password.
Cause 2: Enable SSH on the server and ensure that the server is reachable.
Cause 3: Configure public keys on the server for authentication.
Cause 4: Check whether the ACL rules are correctly configured.
Cause 5: Wait for other users to release connections or increase the maximum number of user connections on the server.
Cause 6: Enable SSH users to access the default directory on the SSH server.