SSH/5/SSH_QX_USER_LOGOUT: The SSH user logged out. (ServiceType=[ServiceType], LogoutReason=[LogoutReason], UserName=[UserName], Tei=[Tei], TransNo=[TransNo])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
ServiceType |
Type of service: STelnet, SNETCONF, or SFTP. |
|
LogoutReason |
User logout reason. |
|
UserName |
User login name. |
|
Tei |
Tei. |
|
TransNo |
Indicates the transaction number. |
Cause 1: SSH Client requested disconnection.
Cause 2: CLI requested disconnection.
Cause 3: SSH Server port got changed.
Cause 4: SSH Service is disabled.
Cause 5: Idle-timeout is reached the maximum value.
Cause 1: Normal operation information, no need to deal with.
Cause 2: Normal operation information, no need to deal with.
Cause 3: Run the display ssh server status command to check the correct ssh service port number and log in using the correct port number.
Cause 4: Please run the stelnet [ ipv4 | ipv6 ] server enable command to enable the stelnet service function.
Cause 5: Please log in again and run the idle-timeout minutes [ seconds ] command to set the timeout period for the user interface to disconnect.