DEBUG/7/SSPSTARTLOG_ALARM

Message

DEBUG/7/SSPSTARTLOG_ALARM: Osnode [OSNODE] alarm information: [ALARMINFO]

In VS mode, this log is supported only by the admin VS.

Description

The alarm diagnosis information was output during system running.

Parameters

Parameter Name Parameter Meaning

OSNODE

System node ID

ALARMINFO

Alarm diagnosis information

Possible Causes

The log was automatically generated after the system was started.

Procedure

1. This log information helps locate the fault that occurs during the system running.

  • This log message is informational only, and no action is required, if the system runs properly.
  • Collect log information and configuration information, and then contact technical support personnel.
Parent Topic: DEBUG
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >