SYSTEM/4/SYS_RELOAD_ACTION: The board was reboot. (ReloadIndex=[ReloadIndex], ReloadImage=[ReloadImage], ReloadCfg=[ReloadCfg], ReloadReason=[ReloadReason], ReloadTime=[ReloadTime], ReloadAction=[ReloadAction], ReloadPaf=[ReloadPaf], ReloadLicense=[ReloadLicense], ReloadPatch=[ReloadPatch]).
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
ReloadIndex |
Indicates the index of the reset device. |
|
ReloadImage |
Indicates the index of the image file loaded for the next startup. |
|
ReloadCfg |
Indicates the index of the cfg file loaded for the next startup. |
|
ReloadReason |
Indicates the cause of the reset. For example, the device is reset before a cold patch takes effect. |
|
ReloadTime |
Indicates the time when the device is reset. For example, # 0x07 0xDB 0x01 0x03 0x08 0x32 0x01 0x01 indicates 2011-1-3, 8:50:1.1. |
|
ReloadAction |
Indicates the value of the reset action. |
|
ReloadPaf |
Indicates the index of the PAF file loaded for the next startup. |
|
ReloadLicense |
Indicates the index of the license file loaded for the next startup. |
|
ReloadPatch |
Indicates the index of the patch file loaded for the next startup. |
1. Run the display device command to check the status of the board.