DRIVER/1/TEMPMONITORFAIL

Message

DRIVER/1/TEMPMONITORFAIL: Slot [BoardSlotID] temperature monitor fail!

In VS mode, this log is supported only by the admin VS.

The temperature sensor of the MonitorBus fail.

Parameter Name	Parameter Meaning
BoardSlotID	ID of the slot where the board with the MonitorBus is inserted

The temperature sensor of the MonitorBus failed.

1. Check whether the log TEMPMONITORRESUME (indicating that the temperature sensor of the MonitorBus recovered) is displayed.

If the log is displayed, go to Step 4. If the log is not displayed, go to Step 2.
If the fault persists and cannot be rectified, replace the board and check whether the log is displayed any longer.

2. If the log is not displayed any longer, go to Step 4. If the log is still displayed, go to Step 3.

3. Collect the alarm information, log information, and configuration information, and contact technical support engineers.

4. End.