MPLS_LSPM/4/TNLHSBRESUME

Message

MPLS_LSPM/4/TNLHSBRESUME: Main LSP of Tunnel resumes from backup LSP in HSB. (TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelAdminStatus=[TunnelAdminStatus], TunnelOperStatus=[TunnelOperStatus])

Description

Traffic switched from the hot-standby CR-LSP to the primary CR-LSP after the primary CR-LSP recovered.

Parameters

Parameter Name	Parameter Meaning
TunnelId	Primary tunnel ID
LocalLspId	LSP ID of the primary tunnel
IngressLsrId	Ingress LSR ID of the primary tunnel
EgressLsrId	Egress LSR ID of the primary tunnel
TunnelAdminStatus	Indicates the management status of the tunnel.
TunnelOperStatus	Indicates the operating status of the tunnel.

Possible Causes

Traffic travels through a hot-standby CR-LSP and the primary CR-LSP recovers.

Procedure

1. This log information is informational only, and no action is required.