OSPF/6/TRAP_VIR_INTF_CHG: The status of the virtual interface changes. (VirtIfAreaId=[VirtIfAreaId], VirtIfNeighbor=[VirtIfNeighbor], ProcessId=[ProcessId], RouterId=[RouterId], VirtIfState=[VirtIfState], InstanceName=[InstanceName])
| Parameter Name | Parameter Meaning |
|---|---|
|
VirtIfAreaId |
Indicates the ID of a transit area. |
|
VirtIfNeighbor |
Indicates the IP address of a neighbor. |
|
ProcessId |
Indicates the ID of an OSPF process. |
|
RouterId |
Indicates the ID of a router. |
|
VirtIfState |
Indicates the status of an interface. |
|
InstanceName |
Indicates the VPN name. |
1. If the interface status of the virtual link changes from Down to P2P (Point-to-Point), this trap message is informational only, and no action is required.
2. If the interface status of the virtual link changes from P2P to Down, check whether a route with the outbound interface being the virtual link interface exists. If the route does not exist, check the reason why the route does not exist. If the route exists, check whether the configurations of the local and peer virtual link interfaces are correct.