TWAMP/2/TWAMP_MEM_TWOWAY_LOSS_active: The two-way loss ratio of the TWAMP test instance exceeded the upper threshold in the 1-minute statistics period. (Test SessionId=[sessionId], MemberId=[memberId], MemberName=[memberName], Value=[Value], UpperLimitThreshold=[UpperLimitThreshold], LowerLimitThreshold=[LowerLimitThreshold], Sender IP=[sender-address], Reflector IP=[reflector-address], Sender Port=[sender-port], Reflector Port=[reflector-port], VPN Instance=[vpn-name])
The two-way packet loss rate of a TWAMP test instance exceeded the threshold in a 1-minute measurement period.
| Parameter Name | Parameter Meaning |
|---|---|
|
sessionId |
TWAMP Light test session ID. |
|
memberId |
TWAMP Light test session member ID. |
|
memberName |
TWAMP Light test session member name. |
|
Value |
Packet loss rate. |
|
UpperLimitThreshold |
The Loss trigger-alarm threshold value. |
|
LowerLimitThreshold |
The clear-alarm Loss threshold value. |
|
sender-address |
IP address of the sender. |
|
reflector-address |
IP address of the reflector. |
|
sender-port |
Port number of the sender. |
|
reflector-port |
Port number of the reflector. |
|
vpn-name |
Indicates the VPN instance name. |
Cause 1: A bit error occurred on the network.
Cause 2: The network bandwidth usage reached or exceeded the preset bandwidth threshold.
Cause 1: A bit error occurred on the network. 1. Check whether a bit error occurred. - If yes, locate the error reason and remove the error. - If not, go to step 2. 2. Collect alarm information and configuration information, and then contact technical support personnel. Cause 2: The network bandwidth usage reached or exceeded the preset bandwidth threshold. 1. Check whether the network bandwidth usage reached or exceeded the preset bandwidth threshold. - If yes, expand the capacity. - If not, go to step 2. 2. Collect alarm information and configuration information, and then contact technical support personnel.