L2-MULTICAST/4/UserPerEntryExceed

Message

L2-MULTICAST/4/UserPerEntryExceed: The number of L2 multicast user entries on QinQ stacking and mapping interfaces in one group has already reached the limit of each multicast group on the board. (GmpAfVersion=[GmpAfVersion], SlotName=[SlotName], VsiName=[VsiName], MulticastGroup=[MulticastGroup], MulticastSource=[MulticastSource], CurrentCount=[CurrentCount], PafValue=[PafValue])

Description

Layer 2 multicast detected that the number of users on the QinQ stacking and mapping interfaces in the group on the board reached or exceeded the maximum number of users in a single multicast group on the board.

Parameters

Parameter Name	Parameter Meaning
GmpAfVersion	GMP(Group Managment Protocol) address family version: 1: IPv4 address family. 2: IPv6 address family.
SlotName	Slot name of the board.
VsiName	VSI name.
MulticastGroup	Multicast group address.
MulticastSource	Multicast source address.
CurrentCount	Current number of users.
PafValue	Maximum number of users in a multicast group on a board, which is defined in the PAF file.

Possible Causes

Layer 2 multicast detects that the number of users on the QinQ stacking and QinQ mapping interfaces in the multicast group on the board has reached or exceeded the maximum number of users in a single multicast group defined in the PAF file. This alarm is generated when a new user attempts to join the multicast group in the preceding case.

Procedure

This trap message is informational only, and no action is required.