EOAM-Y1731/4/VLAN_2DM_EXCEED_THRESHOLD_clear: The result of two-way delay-measure is under the threshold. (MdIndex=[MdIndex], MaIndex=[MaIndex], RemoteMacAddress=[RemoteMacAddress], Timestamp=[Timestamp], DelayValue=[DelayValue], ThresholdValue=[ThresholdValue], DelayValueHigh=[DelayValueHigh], DelayValueLow=[DelayValueLow])
| Parameter Name | Parameter Meaning |
|---|---|
|
MdIndex |
Index of the MD where a two-way frame delay alarm is generated |
|
MaIndex |
Index of the MA where a two-way frame delay alarm is generated |
|
RemoteMacAddress |
Source MAC address contained in the DMR frame received by the local end from the remote end |
|
Timestamp |
Timestamp indicating the time when a two-way frame delay alarm is generated |
|
DelayValue |
Delay when a two-way frame delay alarm is generated |
|
ThresholdValue |
An alarm threshold for two-way frame delay measurement |
|
DelayValueHigh |
32 most significant bits |
|
DelayValueLow |
32 least significant bits |
The device in VLAN networking was enabled with two-way frame delay measurement and was configured with an expected alarm threshold, the network delay fell below the alarm threshold and a two-way frame delay alarm had been generated.
This alarm message is informational only, and no action is required.