VRRP/3/VRRP_SEC_AUTH_FAILURE: VRRP authentication failed. (vrrpTrapPacketSrc=[vrrpTrapPacketSrc], vrrpTrapAuthErrorType=[vrrpTrapAuthErrorType])
| Parameter Name | Parameter Meaning |
|---|---|
|
vrrpTrapPacketSrc |
Source IP address of the received packet |
|
vrrpTrapAuthErrorType |
Authentication failure reason, the value of which can be:
|
The authentication mode or authentication key of the received VRRP packets was inconsistent with that on the local device.
1. Check whether the configurations of the local and remote ends are correct. If there is any incorrect configuration, correct it.
2. End.