PIC/3/hwB1TcaAlarm_clear

Message

PIC/3/hwB1TcaAlarm_clear: B1 threshold crossing alarm is cleared.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot], CardID=[hwPhysicalPortInCard], PortID=[hwPhysicalPortInPort], InterfaceName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of the physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwPhysicalPortName	Name of physical port.

Possible Causes

Cause 0:The fiber cut is rectified.
Cause 1:The fault of excessive line attenuation was rectified.
Cause 2:The transmit part of the opposite station recovers from a fault.
Cause 3:The cross-connect board at the opposite station recovers from a fault or is not in position.
Cause 4:The clock board at the opposite station recovers from a fault.

Procedure

This trap message is informational only, and no action is required.