PIC/3/hwB3TcaAlarm_clear

Message

PIC/3/hwB3TcaAlarm_clear: B3 threshold crossing alarm is cleared.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot], CardID=[hwPhysicalPortInCard], PortID=[hwPhysicalPortInPort], HpID=[hwSDHHpPerfCurrentHpIndex]. InterfaceName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwSDHHpPerfCurrentHpIndex	High-order path ID.
hwPhysicalPortName	Name of physical port.

Possible Causes

Cause 0:The fiber cut is rectified.
Cause 1:The fault of excessive line attenuation was rectified.
Cause 2:The transmit part of the opposite station recovers from a fault.
Cause 3:The cross-connect board at the opposite station recovers from a fault or is not in position.
Cause 4:The clock board at the opposite station recovers from a fault.

Procedure

This trap message is informational only, and no action is required.