BIER/2/hwBierPrefixBfridConflict_active

Message

BIER/2/hwBierPrefixBfridConflict_active: In the same BIER sub-domain, BFR-ID configuration conflicts exist. (AddressFamily=[AddressFamily], SubdomainID=[SubdomainID], ConflictType=[ConflictType], ConflictBFRID=[ConflictBFRID], ConflictPrefix=[ConflictPrefix], ConflictState=[ConflictState], AdvertiserCurrent=[AdvertiserCurrent], AdvertiserNew=[AdvertiserNew], BierPrefixCurrent =[BierPrefixCurrent], BierPrefixNew=[BierPrefixNew], BFRIDCurrent=[BFRIDCurrent], BFRIDNew=[BFRIDNew])

Description

In the same BIER sub-domain, BFR-ID configuration conflicts exist.

Parameters

Parameter Name	Parameter Meaning
AddressFamily	Address family.
SubdomainID	BIER sub-domain.
ConflictType	Conflict type.
ConflictBFRID	Conflicting BFR-ID.
ConflictPrefix	Conflicting prefix.
ConflictState	Conflict state.
AdvertiserCurrent	Current advertiser.
AdvertiserNew	New advertiser.
BierPrefixCurrent	BIER prefix of the current advertiser.
BierPrefixNew	BIER prefix of the new advertiser.
BFRIDCurrent	BFR-ID of the current advertiser.
BFRIDNew	BFR-ID of the new advertiser.

Possible Causes

Configurations conflict.

Procedure

1. In the BIER sub-domain view of each device, run the display this command to check the BFR-ID value configured on each device and check whether the same BFR-ID exists.

If yes, change the BFR-ID values to ensure that each device has a unique BFR-ID value.
If not, go to step 3.

2. Collect alarm and configuration information and contact technical support engineers.

3. End.