MPLS_LSPM/4/hwBlockLabelThresholdExceed_active: The block label usage exceeds the threshold, which may affect the creation of BGP/L2VPNs.(hwBlockLabelTotalCount=[BlockLabelTotalCount], hwBlockLabelCurrentCount=[BlockLabelCurrentCount], hwBlockLabelThresholdUpperLimit=[BlockLabelThresholdUpperLimit], hwBlockLabelThresholdLowerLimit=[BlockLabelThresholdLowerLimit])
In VS mode, this log is supported only by the admin VS.
Block label usage reached the upper threshold. The creation of BGP, or L2VPN maybe affected.
| Parameter Name | Parameter Meaning |
|---|---|
|
BlockLabelTotalCount |
Indicates the total number of block labels. |
|
BlockLabelCurrentCount |
Indicates the number of used block labels. |
|
BlockLabelThresholdUpperLimit |
Indicates the upper limit of block label usage. |
|
BlockLabelThresholdLowerLimit |
Indicates the lower limit of block label usage. |
The device had a large number of BGP VPLS or BGP VLL services configured, causing the block label usage to reach the upper threshold.
1. Delete some BGP VPLS or BGP VLL services. Then check whether the alarm MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.93 hwBlockLabelThresholdExceedClear is generated.
If the alarm is generated, go to step 3.
If the alarm is not generated, go to step 2.
2. Collect the trap and configuration information, and contact technical support.
3. End.