MPLS_LSPM/2/hwBlockLabelTotalCountExceed_active: The block label count reaches the upper limit.(hwBlockLabelTotalCount=[BlockLabelTotalCount], hwBlockLabelCurrentCount=[BlockLabelCurrentCount])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BlockLabelTotalCount |
Indicates the maximum number of block labels supported by the device. |
|
BlockLabelCurrentCount |
Indicates the number of block labels that are currently used on the device. |
The device had an excessive number of BGP VPLS or BGP VLL services configured, causing the block label usage to reach 100%.
1. Delete some BGP VPLS or BGP VLL services. Then check whether the alarm MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.95 hwBlockLabelTotalCountExceedClear is generated.
If the alarm is generated, go to step 3.
If the alarm is not generated, go to step 2.
2. Collect the trap and configuration information, and contact technical support.
3. End.