DEVM/1/hwBoardFail_clear-132139
Message
DEVM/1/hwBoardFail_clear: The board resumed from partial failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType],EntityTrapFaultID=132139,Reason=The subcard voltage exceeded the upper limit of the fatal threshold.)
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalName |
Indicates the name of the physical entity. |
|
EntityType |
Indicates the type of the physical entity. The value can be one of the following: -1: mpu(1) -2: lpu(2) -3: sfu(3) -4: pic(4) -5: cfcard(5) -6: ofc(6) -7: board(7) -255: other(255) |
|
EntityTrapFaultID |
Indicates the error code. |
|
Reason |
Indicates the description of the cause of the trap. |
Possible Causes
The fault that the voltage of the subcard exceeded the upper fatal threshold was rectified.
Procedure
This log message is informational only, and no action is required.