DEVM/1/hwBoardFail_active-132204

Message

DEVM/1/hwBoardFail_active: The board partially failed.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType],EntityTrapFaultID=132204,Reason=The cpu frequency of the board is abnormal.)

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The board experienced a partial failure.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityType	Indicates the type of the physical entity. The value can be one of the following: -1: mpu(1) -2: lpu(2) -3: sfu(3) -4: pic(4) -5: cfcard(5) -6: ofc(6) -7: board(7) -255: other(255)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The cpu frequency of the board is abnormal.

Procedure

1. Perform an active/standby board switchover. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 2.
If the alarm persists, go to Step 3.

2. Check whether the alarm is generated again within 24 hours.

If so, go to Step 3.
If not, go to Step 4.

3. Collect trap, log, and configuration information, and contact technical support.

4. End.