DEVM/1/hwBoardInvalid_clear-132619

Message

DEVM/1/hwBoardInvalid_clear: The board resumed from total failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=132619, Reason=The fault, that the signals obtained from the master and slave MPUs by the board were incorrect, was rectified.)

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The fault, that the signals obtained from the master and slave MPUs by the board were incorrect, was rectified.

Procedure

This trap message is informational only, and no action is required.