DEVM/1/hwBoardInvalid_active-131843

Message

DEVM/1/hwBoardInvalid_active: The board totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=131843, Reason=The board info of the mpu conflicted.)

In VS mode, this log is supported only by the admin VS.

Description

The overall function of the board does not take effect.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The board info of the mpu conflicted.

Procedure

1. Run the display chassis-id all command in the system view to check whether the current and peer chassis have the same ID.

If they have the same chassis ID, go to Step 2.
If they have different chassis IDs, go to Step 3.

2. Run the set chassis-id command in the system view of the current or peer chassis to set a different chassis ID. Restart the device and check whether the alarm is cleared.

If the alarm persists, go to Step 3.
If the alarm is cleared, go to Step 5.

3. Run the display version slot command in the system view to check whether the current and peer chassis have the same MPU type and memory size.

If they have the same MPU type and memory size, go to Step 4.
If they have different MPU types or memory sizes, replace one of the MPUs.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.