DEVM/1/hwBoardInvalid_active-132617

Message

DEVM/1/hwBoardInvalid_active: The board totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=132617, Reason=The TM chip failed the self check.)

In VS mode, this log is supported only by the admin VS.

Description

The overall function of the board does not take effect.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The TM chip failed the self check.

Procedure

1. If the faulty board is neither reset nor powered off, and services on the board are normal, go to Step 4. Otherwise, go to Step 2.

2. Power off the faulty board and then power it on again.

3. If the board cannot be registered or the alarm persists after the board is registered, go to Step 4.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.