DEVM/1/hwBoardInvalid_active-132621

Message

DEVM/1/hwBoardInvalid_active: The board totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=132621, Reason=The control bus of the board is abnormal.)

In VS mode, this log is supported only by the admin VS.

Description

The overall function of the board does not take effect.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The control bus of the board is abnormal.

Procedure

1. Run the reset slot slot-id command to reset the faulty SFU. After the SFU is registered, check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 2.

2. Replace the SFU and check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 3.

3. Collect trap, log, and configuration information, and contact technical support.

4. End.