DEVM/1/hwBoardInvalid_active-132625

Message

DEVM/1/hwBoardInvalid_active: The board totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=132625, Reason=The Lanswitch chip of the board failed.)

In VS mode, this log is supported only by the admin VS.

Description

The overall function of the board does not take effect.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The Lanswitch chip of the board failed.

Procedure

1. Run the display device command to check the status of all the boards on the current device.

2. If all the boards are in the Registered state, contact technical support.

3. If several boards are in the non-Registered state after the alarm occurs, replace the faulty boards.

4. If only one board is in the non-Registered state, collect trap, log, and configuration information, and contact technical support.

5. End.