BRASUM/4/hwBoardNotSupportBasAlarm_clear

Message

BRASUM/4/hwBoardNotSupportBasAlarm_clear: The alarm was cleared because the board that does not support BAS was removed or the BAS configuration was deleted from the board. (Slot=[SlotID])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
SlotID	Slot ID

Possible Causes

The board that does not support BRAS was removed or the BAS configuration was deleted from the board.

Procedure

This trap message is informational only, and no action is required.