DEVM/2/hwBrdTempAlarm_clear: The alarm indicating that the board temperature exceeded the upper alarm threshold was cleared. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityThresholdType=[EntityThresholdType], EntityThresholdCritical=[EntityThresholdCritical], EntityThresholdCurrent=[EntityThresholdCurrent], EntityTrapFaultID=143617, Reason=The board temperature is normal.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalName |
Indicates the name of the physical entity, such as "SFU | LPU | MPU slot slotID". The entity name varies according to the board type, such as the SFU, LPU, and MPU. |
|
EntityThresholdType |
The abnormal type for temperature.The value can be:
|
|
EntityThresholdCritical |
The warning alarm threshold for warning alarm. |
|
EntityThresholdCurrent |
The current value that been measured. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
Reason |
Indicates the description of the cause of the trap. |
This trap message is informational only, and no action is required.