DEVM/2/hwBrdTempFatalAlarm_clear: The board temperature was restored to a normal value. .(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName],EntityThresholdType=[EntityThresholdType], EntityThresholdCritical=[EntityThresholdCritical], EntityThresholdCurrent=[EntityThresholdCurrent], EntityTrapFaultID=143873, Reason=The card temperature was restored to a normal value.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalName |
Indicates the name of the physical entity. |
|
EntityThresholdType |
The abnormal type for temperature: 1: hige. 2: low. |
|
EntityThresholdCritical |
The critical alarm threshold for critical alarm. |
|
EntityThresholdCurrent |
The current value that been measured. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
Reason |
Indicates the description of the cause of the trap. |
This trap message is informational only, and no action is required.