NAT/2/hwCGNNoPatAddrGroupExhaustAlarm_active

Message

NAT/2/hwCGNNoPatAddrGroupExhaustAlarm_active: Addresses in the NO-PAT public address pool ran out. (AddrGroupName=[AddrGroupName], InstanceType=[InstanceType], InstanceName=[InstanceName], Pre-IPNum=[IPNum], Slot =[Slot], Cpu=[Cpu])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The IP addresses in a specified NO-PAT address pool were used up.

Parameters

Parameter Name	Parameter Meaning
AddrGroupName	Name of an IP address pool.
InstanceType	Instance type.
InstanceName	Instance name.
IPNum	Number of used IP addresses.
Slot	Slot ID of a service board.
Cpu	CPU ID of the service board.

Possible Causes

The IP addresses in a specified NO-PAT address pool were used up.

Procedure

1.Reduce used address number.

2.Collect trap, log, and configuration information, and then contact technical support personnel.