NAT/4/hwCGNNoPatAddrGroupThresholdAlarm_active

Message

NAT/4/hwCGNNoPatAddrGroupThresholdAlarm_active: The number of IP addresses allocated from the no-pat public network address pool reached the threshold. (AddrGroupName=[AddrGroupName], InstanceType=[InstanceType], InstanceName=[InstanceName], Pre-IPNum=[IPNum], Threshold=[Threshold], Slot=[Slot], Cpu =[Cpu])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The number of used No-PAT address pools in a NAT instance reached the threshold.

Parameters

Parameter Name	Parameter Meaning
AddrGroupName	Name of an IP address pool.
InstanceType	Instance type.
InstanceName	Instance name.
IPNum	Total number of IP addresses in an address pool.
Threshold	Threshold of the proportion of used IP addresses to all IP addresses in a specified no-PAT address pool.
Slot	Slot ID of a service board.
Cpu	CPU ID of the service board.

Possible Causes

The proportion of used IP addresses to all IP addresses in a specified no-PAT address pool reached a specified threshold.

Procedure

1.Reduce used address number.

2.Collect trap, log, and configuration information, and then contact technical support personnel.