NAT/2/hwCGNSessionExhaustAlarm_active
Message
NAT/2/hwCGNSessionExhaustAlarm_active: CGN session resources ran out. (SessionNumber=[SessionNumber],Slot=[Slot], Cpu=[Cpu])
This log is supported only on NetEngine 8000 F1A.
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
SessionNumber |
Number of established sessions. |
|
Slot |
Slot ID of a service board. |
|
Cpu |
CPU ID of the service board. |
Possible Causes
The number of established CGN sessions reached the maximum number of CGN sessions that can be established on the device.
Procedure
1.Run the display nat session table command to view NAT sessions established on a NAT device. Check whether the number of established NAT sessions reaches the maximum number.
- If the number of established NAT sessions has reached the maximum number, increase the maximum number by purchasing a license.
- If the number of established NAT sessions has not reached the maximum number specified in a license, go to Step 2.
2.Collect trap, log, and configuration information, and then contact technical support personnel.