NAT/2/hwCGNUserTableExhaustAlarm_active

Message

NAT/2/hwCGNUserTableExhaustAlarm_active: User tables ran out. (UserTableNum=[UserTableNum],Slot=[Slot], Cpu=[Cpu])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The NAT user table resources are exhausted.

Parameters

Parameter Name	Parameter Meaning
UserTableNum	Number of user tables that are used.
Slot	Slot ID of a service board.
Cpu	CPU ID of the service board.

Parameter Name

Parameter Meaning

UserTableNum

Number of user tables that are used.

Slot

Slot ID of a service board.

Cpu

CPU ID of the service board.

Possible Causes

The number of used user tables reached the upper limit.

Procedure

1.Run the display nat user-information command to view NAT sessions established on a NAT device. Then check whether the number of used NAT user tables reaches the maximum number. - If the number of used NAT user tables has reached the maximum number, add more boards. - If the number of used NAT user tables has not reached the maximum number, go to Step 2. 2.Collect trap, log, and configuration information, and then contact technical support personnel.