PIC/1/hwCardInvalid_clear-135444

Message

PIC/1/hwCardInvalid_clear: The card resumed from total failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex],EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=135444, ReasonDescription=Subcard backup control bus fault recovery.)

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityType	Indicates the type of the physical entity.
EntityTrapFaultID	Indicates the error code.
ReasonDescription	Indicates the description of the cause of the trap.

Possible Causes

Subcard backup control bus fault recovery.

Procedure

This trap message is informational only, and no action is required.