PIC/1/hwCardInvalid_active: The card failed completely. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=135428, ReasonDescription=The subcard does not match the slot.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalName |
Indicates the name of the physical entity. |
|
EntityType |
Indicates the type of the physical entity. |
|
EntityTrapFaultID |
Indicates the error code. |
|
ReasonDescription |
Indicates the description of the cause of the trap. |
1.Install a subcard that matches the slot.