PIC/1/hwCardInvalid_active: The card failed completely. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=135442, ReasonDescription=The subcard is uncompatible with system software.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalIndex |
Indicates the index of the physical entity. |
|
EntPhysicalName |
Indicates the name of the physical entity. |
|
EntityType |
Indicates the type of the physical entity. |
|
EntityTrapFaultID |
Indicates the error code. |
|
ReasonDescription |
Indicates the description of the cause of the trap. |
1.Reseat the card and check whether the alarm is cleared. If the alarm persists, go to step 2.
2.Replace a new card and check whether the alarm is cleared. If the alarm persists, go to step 3.
3.Collect information about alarms, logs, and configurations, and then contact technical support personnel.