PIC/1/hwCardInvalid_clear

Message

PIC/1/hwCardInvalid_clear: The card resumed from total failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex],EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=[EntityTrapFaultID], ReasonDescription=[ReasonDescription])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityType	Indicates the type of the physical entity.
EntityTrapFaultID	Indicates the error code.
ReasonDescription	Indicates the description of the cause of the trap.

Possible Causes

Cause 8:Subcard self-test success.
Cause 135424:Subcard EPLD logic failure recovery.
Cause 135425:Subcard FPGA logic failure recovery.
Cause 135426:Subcard key component failure recovery.
Cause 135427:Subcard clock unit failure recovery.
Cause 135428:The daughter card matches the original slot type.
Cause 135429:Subcard NP failure recovery.
Cause 135430:Subcard heartbeat failure recovery.
Cause 135432:The daughter card is registered successfully.
Cause 135433:Subcard memory component failure recovery.
Cause 135434:Subcard data channel failure recovery.
Cause 135439:The daughter card is powered on.
Cause 135442:The daughter card type is compatible with version.
Cause 135444:Subcard backup control bus fault recovery.
Cause 135447:Subcard backup data channel failure recovery.
Cause 135448:Subcard backup key component failure recovery.
Cause 135467:The forwarding channel resources becam sufficient.

Procedure

This trap message is informational only, and no action is required.