DEVM/1/hwCardRemove_active-133376

Message

DEVM/1/hwCardRemove_active: The card was removed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=133376, Reason=The card was removed.)

In VS mode, this log is supported only by the admin VS.

Description

The subcard was removed.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityType	Indicates the type of the physical entity.
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The card was removed.

Procedure

1.Install the card and check whether the alarm is cleared.

If the alarm is cleared, go to step 3.
If the alarm persists, go to step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3. End.