DEVM/1/hwChassisFail_clear

Message

DEVM/1/hwChassisFail_clear: The chassis resumed from partial failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[ReasonDescription])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity, such as chassis.
EntityTrapFaultID	Indicates the error code.
ReasonDescription	Indicates the description of the cause of the trap.

Possible Causes

Cause 131328:The dustproof of the cabinet cleaned.
Cause 131330:MPU in the chassis is full.
Cause 131333:the fan or power is consistent.
Cause 131340:This trap message is informational only, and no action is required.
Cause 131343:The power supply would be abnormal because excessive fan boards were installed.
Cause 131344:The switch 1 on the power panel is closed.
Cause 131345:CMUs were fully configured.
Cause 131346:The switch 2 on the power panel is closed.
Cause 131347:the number of pm on two plane is equate.
Cause 131348:Power is enough.
Cause 131349:The dustproof gate is closed.
Cause 131350:Make the power sufficient or undo power limit.
Cause 131351:Power backplane cable is stable
Cause 131352:Fan backplane cable of LPU area is stable
Cause 131353:Fan backplane cable of fabric card area is stable
Cause 131354:SFU is failed,the number of the registered SFU is less than default number in chassis.
Cause 131355:The backplane ID detection recovered.
Cause 131357:When the rollback time expires, flash is locked.
Cause 131359:IPUs with different forwarding capabilities were inserted on the device.
Cause 131361:CXPs with different forwarding capabilities were inserted on the device.

Procedure

This trap message is informational only, and no action is required.