DEVM/1/hwChassisInvalid_active-131587

Message

DEVM/1/hwChassisInvalid_active: The chassis totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntityPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=131587, Reason=The board types of the master and slave MPUs are different.)

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The chassis totally failed.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity, such as "chassis"
EntityTrapFaultID	Indicates the error code.
Reason	Indicates the description of the cause of the trap.

Possible Causes

The board types of the master and slave MPUs are different.

Procedure

1. Install master and slave MPUs of the same board type.

2. If the alarm still exists, collect trap, log, and configuration information, and contact technical support personnel.

3. End.