DISASTER_RECOVERY/2/hwCuCpRoleConflict_active

Message

DISASTER_RECOVERY/2/hwCuCpRoleConflict_active: The disaster recovery roles of two CPs conflict.(hwSourceIpAddress=[hwSourceIpAddress],hwPeerIpAddress=[hwPeerIpAddress])

In VS mode, this log is supported only by the admin VS.

Description

The disaster recovery roles of two CPs conflicted.

Parameters

Parameter Name	Parameter Meaning
hwSourceIpAddress	IP address of the peer controller of CP1's CUSP channel
hwPeerIpAddress	IP address of the peer controller of CP2's CUSP channel

Possible Causes

The roles configured for the two CPs conflicted and they had the same priority.

Procedure

1.Check whether the master/backup roles configured for the disaster recovery groups on the two CPs conflict. If they conflict, run the set preferred-role { master | slave } command in the disaster recovery group view to configure different master/backup roles for the two CPs.

If the trap is cleared, go to Step 3.
If the trap persists, go to Step 2.

2.Collect trap, log, and configuration information, and contact technical support personnel.

3.End.