DEVM/2/hwEntityCheckFail_clear: Physical entity is detected resumed from failure.(BaseTrapSeverity=4, BaseTrapProbableCause=68159, BaseTrapEventType=9, EntityPhysicalIndex=1091239937, EntPhysicalContainedIn=1091239937, EntPhysicalName=CR55MPUB ccc2/9, RelativeResource=NA, ReasonDescription=CR55MPUB ccc2/9 is incompatible with master mpu.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
indicates the severity level of the trap reported to the NMS. |
|
BaseTrapProbableCause |
Indicates the possible cause of the trap. |
|
BaseTrapEventType |
Indicates the trap type. |
|
EntityPhysicalIndex |
Physical index. The physical index varies with the chassis ID. |
|
EntPhysicalContainedIn |
Indicates the parent index. |
|
EntPhysicalName |
Indicates the name of the entity such as a chassis. |
|
RelativeResource |
Indicates the name of the part related to the trap. |
|
ReasonDescription |
Indicates the description of the possible cause. |
The fault where the board type of the local chassis did not match that of the peer chassis was rectified.
This trap message is informational only, and no action is required.