DEVM/2/hwEntityCheckFail_active: Physical entity is detected failed.(BaseTrapSeverity=5, BaseTrapProbableCause=69639, BaseTrapEventType=5, EntityPhysicalIndex=5, EntPhysicalContainedIn=3, EntPhysicalName=System, RelativeResource=NA, ReasonDescription=The device will enable secure boot.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
indicates the severity level of the trap reported to the NMS. |
|
BaseTrapProbableCause |
Indicates the possible cause of the trap. |
|
BaseTrapEventType |
Indicates the trap type. |
|
EntityPhysicalIndex |
Physical index. The physical index varies with the chassis ID. |
|
EntPhysicalContainedIn |
Indicates the parent index. |
|
EntPhysicalName |
Indicates the name of the entity such as a chassis. |
|
RelativeResource |
Indicates the name of the part related to the trap. |
|
ReasonDescription |
Indicates the description of the possible cause. |
After you configure the time in which a non-security software package can still be used, an alarm is reported every hour in this time, informing you of the remaining time. After the time expires, no non-security software package can be used.
This trap message is informational only, and no action is required.