DEVM/1/hwEntityRemove_clear

Message

DEVM/1/hwEntityRemove_clear: Physical entity is inserted.(BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[BaseTrapProbableCause], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntPhysicalContainedIn], EntPhysicalName=[EntPhysicalName], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the severity level of the trap reported to the NMS.
BaseTrapProbableCause	Indicates the possible cause of the trap.
BaseTrapEventType	Indicates the trap type.
EntityPhysicalIndex	Indicates the physical index.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
Reason	Reason.

Possible Causes

Cause 65536:A board was inserted.
Cause 65537:A board was inserted.
Cause 65538:A CF card was inserted.
Cause 65539:A subcard was inserted.
Cause 65540:The physical entity was properly installed.
Cause 65541:A optical module was inserted.
Cause 65542:A board was inserted.

Procedure

This trap message is informational only, and no action is required.