DEVM/1/hwEntityReset_clear

Message

DEVM/1/hwEntityReset_clear: Physical entity reset resumed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[BaseTrapProbableCause], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntPhysicalContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=[ReasonDescription])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the physical index.
BaseTrapProbableCause	Possible reason.
BaseTrapEventType	Indicates the possible cause of the trap.
EntityPhysicalIndex	Indicates the trap type.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

Possible Causes

Cause 66561:The slave MPU was reset because of no Heartbeat packets was cleared.
Cause 66563:The number of the MAC addresses on the LPU was normal.
Cause 66568:The SFU was reset because the Heartbeat packets were dropped was cleared.
Cause 66576:The interface board was reset because the Heartbeat packets were dropped was cleared.
Cause 66590:A board recovered from a reset by a command.
Cause 66591:The chassis recorved from a reset.

Procedure

This trap message is informational only, and no action is required.