DEVM/4/hwEthHalfDuplex_active: Eth half duplex. (IfIndex=[hwPhysicalPortIfIndex],IfName=[hwPhysicalPortName])
In VS mode, this log is supported only by the admin VS.
Interface negotiation into half-duplex mode, resulting in a large number of packet loss.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwPhysicalPortIfIndex |
Index of physical port. |
|
hwPhysicalPortName |
Name of physical port. |
Port configurations are different between the two sides (one port is set to speed force, and the other port is set to negotiation). As a result, the ports negotiate to half-duplex, and packet loss occurs, triggering a half-duplex alarm.
1. Check whether the speed configurations are different between the two sides. If not, change them to be the same.
2. If the configurations are the same, check the connections on the two sides. Modify the connection problem, and check whether the alarm is cleared.
3. Collect alarm information, log information and configuration information, and then contact technical support personnel.
4. End.