EOAM-1AG/2/hwEthoamClosePortAlarm_active

Message

EOAM-1AG/2/hwEthoamClosePortAlarm_active: NNI or Remote UNI fault, the service UNI interface is closed by Ethernet OAM PortLink Function.(PhysicalIndex=[PhysicalIndex],ChassisId=[ChassisId],SlotId=[SlotId],CardId=[CardId],PortId=[PortId],PortDecrip =[PortDescrip],MepId=[MepId],UniName=[UniName]).

Description

The physical interface is disabled by Ethernet OAM.

Parameters

Parameter Name	Parameter Meaning
PhysicalIndex	The Index of physical port.
ChassisId	Indicates the chassis number.
SlotId	Indicates the slot number.
CardId	Indicates the card number.
PortId	Indicates the port number.
PortDescrip	Indicates the description of port.
MepId	Indicates the Mep number.
UniName	The name of Uni interface.

Possible Causes

ETHOAM 1ag detect ccm lost or oam fail, or the uni interface of rmep is down .

Procedure

1.Check the status of Ethoam.If the Ethoam detect ccm lost or oam fail, then resume the Ethoam alm. - If the alarm is cleared, go to Step 4. - If the alarm is not cleared, go to Step 2. 2.Check the uni interface of rmep.If the uni interface down,then resume the broken. - If the alarm is cleared, go to Step 4. - If the alarm is not cleared, go to Step 3. 3.Collect alarm information, log information and configuration information, and then contact technical support personnel. 4.End.